Cold rolled grain-oriented electrical steel sheet
This material is widely used in the cores of transformers, large power generators and
other electrical equipment. It has excellent magnetic properties in the rolling direction, high permeability, low
core loss, low magnetostriction, and low fabrication stress sensitivity. |
Cold rolled non-oriented electrical steel sheet
This material is widely used in cores of rotating machines, small transformers, electrical home appliances and other application. It has uniform and
excellent magnetic properties in all directions, high lamination factor and good workability. |
|
Specification |
Applications |
|
As per JIS C2552 standard
Grade: 35H210~ 50H1300
Thickness: 0.35mm ~ 0.50mm
|
Rotating machines
General use A-C motors
Audio transformers
Current and potential transformers
Ballast
Magnetic switch cores |
|
Electro galvanized steel sheet
This material is uniformly galvanized to produce a smooth, attractive surface finish, it provided added protection against corrosion and improves
paint ability. |
|
Specification |
Applications |
|
SECC as per JIS G3313
Thickness: 0.40mm ~ 2.30mm |
Automotives parts such as exterior and interior panels
Electrical appliances such as computer cases or parts, chassis and mechanicals parts for audio equipment |
|
| Hot-dipped galvanized steel sheet
This material is galvanized with thicker coating for better corrosion resistant, excellent workability, good
weld ability with or without spangles |
|
Specification |
Applications |
|
SGCC as per JIS G3302
Thickness: 0.30mm ~ 2.00mm |
Construction materials such as shutters and doors, ducts, ceilings and floors
Casing for electrical equipment and outdoor structures |
|
Electrolytic tinplate
This material has always been a strong, low-cost steel coated with tin for a beautiful, corrosion-resistant surface |
|
Specification |
Applications |
|
SPTE as per JIS G3303
Thickness: 0.30mm ~ 0.60mm |
Food cans, beer and soft drinks cans, general cans, crown caps and screw caps
Electronic parts such as tuners casing or stamped parts |
|
Cold rolled and hot rolled steel sheet
This is the basic material for automotive, electrical and electronics products, appliances and many more application for use in our modern life
|
|
Specification |
Applications |
SPCC as per JIS G3141
Thickness: 0.30mm ~ 2.00mm
SPHC as per JIS G3131
Thickness: 1.20mm ~ 4.00mm |
Automotive, electrical and electronics components, construction material, structural use |
|
|
Other steel items for various applications
Please enquiry to us
if you have specific requirements
|
|
Above material can be
supplied in:
- Slitted coil for progressive stamping process
- Cut sheet for staged stamping process
- Pressed metal parts for electrical &
electronic
components
- EI Lamination core for transformers and
motors.
- Blank shell for compressor covers.
Target Customers
- Metal stamping companies.
- International procurement companies.
- Electrical and electronics component makers.
- Regional and overseas companies.
|
